Alctron DCT200 Isolated Multi Power Supply Station For Guitar Effects


The DCT200 will supply power your guitar effects pedals from a single power point reliably and without noise, thanks to an isolated onboard transformer.

By: on 31 December 2015
The power supply is a real solid heavy transformer with isolated tappings for each supply just as advertised. All metal, no plastic crap here. It came with an excellent range of leads which is rare these days. Before connecting up to expensive pedals, I tested each outlet and found the fixed 9V outlets to be slightly low at around 8.85V but the adjustable outlets (7&8 in dip switch normal setting) were running high at 11V. I simply fiipped the dip switches for 7&8 to adjustable setting and adjusted them using the little front mounted pots until my meter read 9V. If required I can always use one for higher output such as 18V for those pedals that require it. Plugging in the unit, it runs silent and added no buzz or hiss what so ever which is fantastic. A great product at an excellent realistic price. Swamp service as always was awesome and it arrived in a few days even during the Christmas rush.
(4)

Write a product review

ALCTRON DCT200 - Isolated Multiple Power Supply Station for Guitar Pedal Set ups

Alctron Isolated Pedal Board Power Supply
The DCT200 will supply power your guitar effects pedals from a single power point reliably and without noise, thanks to an isolated onboard transformer. The unit can supply up to 9 dedicated DC electrical currents and 12V AC current. The unit also provides provides the user with an impressive array of selectable output configurations to power nearly any guitar effect pedal on the market.

Selectable Outputs
Using 8 individual DIP switches located on the bottom of the unit, each channel output can be switched between two options, allowing the DCT200 to power viretually any effect pedal that uses the standard plug size, with output voltages available from 4V-14.5V. Channels 7 and 8 also provide a paramteric control to sweep the output voltage between 4V and 9V when the DIP switch is ON for these channels.

Why Power Stations are Important
Powering 4 or 5 pedals with a daisy chain is fine, if they are relatively low 'current' consumption pedals. But if you're powering more than this off a single 9V AC/DC adapter you can overdraw the power supply and create electrical issues within the pedals. This can often result in unwanted buzz or noise in your audio signal.

Features:

  • 8x DC Output Power Brick
  • 8x DC Power Cords
  • 2x Polarity Converter Cables
  • 1x 240V IEC cable
  • 1 x AC and 1 x DC 12V output
  • 110/240V Mains Voltage Selector
  • Change Output Voltage / Current Using DIP Switch for Each Channel
  • 2x Sweepable Output Voltage Channels (With DIP Switch ON)
  • Complete Isolation and short circuit protection
  • On/Off Switch for LEDs

Specifications:

  • Switchable 110-120V to 220-240V input
  • Plug Size: 2.1mm (ID) x 5.5mm (OD)
  • Dimensions: 170 x 110 x 70mm (including feet)
  • Weight: 800grams
  • Voltage / Current Output Configuration:
    • DIP Switch Normal (OFF):
      • 1-4: 9V / 100mA
      • 5-6: 9V / 250mA
      • 7-8: 9V / 100mA
    • DIP Switch ON:
      • 1-4: 12.3V / 60mA
      • 5: 14.5V / 50mA
      • 6: 12V / 200mA
      • 7-8: 4V~9V / 100mA
    • DIP Switch ON or OFF:
      • AC: 12V / 250mA
      • DC: 12V / 250mA
  • All Outputs are Negative Centre Polarity

Custom Label: MP-AC-DCT200--ACS-K3748

SKU: MP-AC-DCT200--ACS-K3748

Shipping Weight: 1.8500