-
|
|
Swamp SGC-103 Instrument / Guitar cable, 100m roll. Features a tight braided shield for optimum noise rejection, thick 23AWG conductors built using OFC (oxygen free copper) and a conductive PVC sleeve that eliminates handling noise.
|
-
|
|
Table top mic stand with a flexible gooseneck and mic clip. Designed for those occasions were a small, discret mic stand is required. Great for recording office meetings or as a desk stand for a home studio set up.
|
-
|
|
Slat Wall Guitar Hanger - Can angle up to 180 degrees
|
-
|
|
Swamp speaker cable terminated with 1x Speaker and 1x XLR(f) connectors. Common uses for this Speaker cable. Handy for those occasions when an older speaker with a XLR(f) input needs to be connected to a power amplifier with a Speakon output. Or vice versa.
|
-
|
|
Swamp speaker cable terminated with 1x Speaker and 1x XLR(m) connectors. Common uses for this Speaker cable. Handy for those occasions when an older speaker with a XLR(m) input needs to be connected to a power amplifier with a Speakon output. Or vice versa.
|
-
|
|
Swamp 1m, 2.5mm² 2 core speaker link cable between 1/4"(f) connectors. When to use this linking cable? Ideal for linking between 1/4" speaker cables for extra length when required. Suitable for audio and power transfer between power amplifiers and passive speakers (speaker level signals).
|
-
|
|
Swamp 13AWG, 2.5mm² 2 core speaker cable between two industry standard speaker connectors. The speakon connectors are designed with a secure locking system and are fully shielded.
|
-
|
|
Swamp 1m, 2.5mm² 2 core speaker link cable between one 1/4"(f) and one dual banana connector. When to use this linking cable? Ideal for linking with an existing 1/4"speaker cable to connect equipment with Banana connectors. Suitable for audio and power transfer between power amplifiers and passiv...
|
-
|
|
Swamp speaker 'linking' cable terminated with 1x Speaker(m) and 1x 1/4"(f) connectors. When to use this linking cable? Ideal for linking with an existing speaker cable to gain correct connections. Use this link cable to convert a 1/4" to 1/4" cable into Speakon to 1/4". Handy for those occasions ...
|
-
|
|
Swamp speaker 'linking' cable terminated with 1x Speaker(f) and 1x 1/4"(m) connectors. When to use this linking cable? Ideal for linking with an existing speaker cable to gain correct connections. Use this link cable to convert a Speakon to Speakon cable into Speakon to 1/4". Handy for those occa...
|
-
|
|
Swamp speaker 'linking' cable terminated with 1x Speaker(f) and Dual Banana connectors. When to use this linking cable? Ideal for linking with an existing speaker cable to gain correct connections. Use this link cable to convert a Speakon to Speakon cable into Speakon to dual Banana. Handy for th...
|
-
|
|
Swamp speaker 'linking' cable terminated with 1x Speaker(f) and 1x XLR(f) connectors. When to use this linking cable? Ideal for linking with an existing speaker cable to gain correct connections. Use this link cable to convert a Speakon to Speakon cable into Speakon to XLR(f). Handy for those occ...
|
-
|
|
Swamp speaker 'linking' cable terminated with 1x Speaker(f) and 1x XLR(m) connectors. When to use this linking cable? Ideal for linking with an existing speaker cable to gain correct connections. Use this link cable to convert a Speakon to Speakon cable into Speakon to XLR(m). Handy for those occ...
|
-
|
|
Swamp speaker 'linking' cable terminated with 1x Speaker(f) and 1x XLR(m) connectors. When to use this linking cable? Ideal for linking with an existing speaker cable to gain correct connections. Use this link cable to convert a Speakon to Speakon cable into Speakon to XLR(m). Handy for those occ...
|
-
|
|
This particular guitar lead features a black heat shrink over the Neutrik connector, that provides extra support and protection to solder connections for added durability. A heat shrink is great for leads that are used and plugged in and out constantly.
|
-
|
|
Swamp 1/4"(m) to 1/4"(m) TRS Audio Link Cable. This cable is suitable for carrying a stereo OR balanced signal between 1/4" plugs.
|
-
|
|
Swamp vocal height microphone stand, including boom. This is a sturdy, adjustable, well made professional mic stand that can extend to a maximum height of 214cm
|
-
|
|
Swamp Wall Bracket Speaker Mount. Heavy duty wall mount for pro audio speakers. All steel construction, this is a strong and robust bracket designed for mounting PA speakers on a fixed flat wall area. Versatile Positioning. Has the ability to angle 180 degrees from right to left, as well as up an...
|
-
|
|
The WS-03 studio workstation from Swamp is specially designed for modern musicians and studio engineers. With rock-solid integration in mind, it has been built from the ground up to accommodate professional audio hardware and computer devices and peripherals.
|
-
|
|
The WS-04 rack stand from Swamp with a 12U rack mount capacity, is an excellent addition to your recording studio for your collection of rack mount devices.
|
-
|
|
Swamp Industries 80cm XLR(female) - 1/4"(male) TS microphone cable. Gauge: 20GA, Core: 1x (20x 0.10mm) conductors, Length: 80cm, Connectors: 3pin XLR (f) to 1/4"(m) TS
|
-
|
|
Swamp XLR(f) to 3.5mm Mini-Jack Link Cable 2m. This is a twin conductor cable and is suitable for carrying a balanced signal from an XLR output to a 3.5mm (1/8") input socket.
|
-
|
|
Swamp XLR(male) - 1/4" / 6.5mm (male) unbalanced microphone / line level cable. This cable is suitable for transferring either mic level or line level signals. Generally this connection is between a mixer out and a power amplifier.
|
-
|
|
Swamp XLR(m) to 3.5mm Mini-Jack Link Cable 2m. This is a twin conductor cable and is suitable for carrying a balanced signal from an 3.5mm (1/8") Mini-Jack output to a balanced XLR input socket.
|
-
|
|
The XZ-703 studio workstation from Swamp is specially designed for home musicians and studio engineers. With a large long workspace area and top shelf, the XZ-703 allows space for multiple monitors and computer peripherals.
|
|
|
_XLR(f)_1-5_1m.jpg)
_XLR(m)_1-5_1m.jpg)
_1-4(f)_1-5_1m.jpg)
_Ban_1-5_1m.jpg)
_Spk_1-5_1m.jpg)
_1-4_1-5_1m.jpg)
_Ban_1-5_1m.jpg)
_XLR(f)_1-5_1m.jpg)
_XLR(m)_1-5_1m.jpg)
-1-4(m)-S.jpg)
-1-8(m).jpg)
-1-8(m).jpg)
