SWAMP XLR and IEC AU Plug Power Portable Cable Reel - 25m
Be The First To Review This Product!
Help other SWAMP Industries users shop smarter by writing reviews for products you have purchased.
SWAMP Combo XLR Audio and IEC Power Cable in Portable Reel- 25 Metre Length
2 in 1 power and XLR audio cable for powered speakers on a convenient, fully portable, lightweight reel with handle. The power cable is fitted with an IEC-C13 connector (kettle plug) and 3-pin Australian mains plug. The audio cable is terminated with 3 pin XLR male and female connectors and is designed to carry a balanced mic or line level signal.
Ideal amount of Cable Spread / Separation
With 65cm of spread at the end of the cable, it is easy to connect to your mixer / PA XLR output as well as a power source. On the side of the reel is an IEC input to connect your 240v power source and an XLR input to send your audio signal
No More Kinks in Your Cables
The portable reel will help keep your cables in perfect, kink free condition, and ensure you have a tidy stage area by keeping excess cable neatly wound up. Just roll out the exact amount of cable you require for the show, and then simply wind it back up at the end. No more breaking the back to roll up 25m cables at the end of a show- just wind the handle, roll up and load out.
Sturdy and Easy to Carry
The reel itself is made from sturdy, yet lightweight plastic with a molded plastic handle to wind the cable with, which is mounted on a solid metal frame. It is designed to by placed on a flat surface whilst allowing you wind out or wind up without moving. With the rubber gripped metal handle also being part of the frame, the reel is simple and painless to carry around, making this all in one unit a must for any set up.
Perfect for Powered Speakers
This combo lead is the ideal solution for running powered speakers. Instead of rummaging through your crate for multiple leads and laying out separate power and XLR audio cables, this power/ XLR audio combo reduces the cable run to a single loom per speaker, cutting down the time and effort required for set up and pack down.
Power for your Mix Position
The XLR/IEC combo provides a loom that can serve to provide a power run and audio signal to and from your mix position when a multicore is either not required or not available. Typical scenario would be corporate events and functions where it is important for mix position to remain out of sight.
- Length: 25m (25 metre)
- Cable Spread: 65cm between IEC and XLR
- Conductor Cores: 3*1.5mm2
- Outer Diameter: 8mm
- Power Connectors: IEC-C13 to 3 Pin AU Power Plug, Compliant with AS/NZS3112
- Audio Connectors: Yongsheng YS137N-B and YS136N-B
- Cable Core: 0.15mm*7*2(Conductors) + 0.12mm*32(Ground)
- Cable Gauge: 24 AWG (0.22mm2)
- Cable Colour: Black
- Reel Dimensions: 36.5 H x 28 W x 20cm D
Custom Label: KF-MLD510 25m
Shipping Weight: 6.5000