SWAMP 1/4" Speaker Cable - Red Heat Shrink 80cm
SWAMP 2-Core 15AWG Speaker Cable - 1/4" TS - Red Heat Shrink
2-Core Cable with OFC Copper Conductors
Constructed with 2-core speaker cable utilising OFC copper. Each conductor is 15AWG (1.5mm2) and has individual insulation. Both are encased in a tough outer PVC jacket.
1/4" Jack Speaker Cable
Commonly used for guitar head/amp to speaker quad box connectors, but suitable for any connections between power amplifiers and passive speakers with 1/4" sockets. The 1/4" jack is found on older pro audio speaker and amplifiers with the Speakon connector replacing the 1/4" jack for speaker level connections on modern equipment.
Red Heat Shrink
This cable features red heat shrink over both Yongsheng connectors, which provides extra support and protection to internal solder connections for added durability. Heat shrink is great for cables which are constantly in use and which may be plugged in and out constantly, as well as for making your cables stand out and easier to identify.
- Red heat shrink
- Length: 80cm (80 centimetre)
- Conductor Gauge: 15AWG
- Conductor Area: 1.5mm2
- Outer Diameter (OD): 7mm
- Connectors: Dual 1/4" Jack (male)
- Wiring: +1, -1 (2-core)
- Connectors: 1/4"(m) or 6.35mm TS (Yongsheng YS224)
Custom Label: YS224 YS224 215 RED 80cm
Shipping Weight: 0.1200
SWAMP 1/4" Speaker Cable - Amp Head to Cab -19 April 2017I replaced the 1.5m cable that came with the Blackstar 4x8 8ohms cab with the15awg 1.5mm gauge 80cm Swamp cable. Made a huge difference- much deeper fuller low tones. Got heaps of crunch on call if u want it. Good value. Naturally, if it was 4ohms, then I would have got 12awg.
By: Jens Finke on 7 April 2016I use this cable to connect my Marshall 2061x head to my 1936v speaker cabinet. Great heavy duty cable and a perfect length.Fantastic signal transfer.