RETURNED: SWAMP 10 Channel Powered Mixing Desk - 2x 300W - 8 Mic Preamps - Graphic EQ

In Stock

RETURNED: 8 XLR Mic Preamp Inputs - 2x Stereo 1/4" Inputs - 2x 300W Power Amp. Equipped with a 7-Band Graphic Equalizer and rack rails for 19" rack mounting, also a built in stereo power amplifier rated at 300W @8ohm and 450W @4ohm per channel.

IMPORTANT: This is a factory second. The item was opened by customer and found that the 'SUB 1-2' assignment button on CHANNEL 5 is stuck pressed in. The item has not been used, and is otherwise brand new. The button may be able to be removed from its stuck position, though if not, simply will send a signal of channel 5 to the SUB group outputs. This does not impact the performance of the main outputs or powered outputs in anyway. All packaging, manual and parts included. 1 year warranty

NOTE: Remote shown in image no longer included.

SWAMP M210-P Powered Mixing Desk - 8 XLR Mic Preamp Inputs - 2x 300W Power Amp
The M-series mixers from SWAMP boast a sleek, compact design in a durable lightweight housing at an affordable price. Featuring all the controls you'd expect from a modern mixing console, the M-series are a no nonsense workhorse suited perfectly for a gigging band, solo artist, function venue, or rehearsal studio. The M210-P model is also equipped with a built in power amplifier than can drive 300W of power to 2x passive speakers, along with the 19" rack mounting capability makes this an ideal all-in-one mixer/amp solution.

Powered Mixer with 2x 300W Output
The M210-P has a built in stereo power amplifier rated at 300W RMS @8ohm and 450W RMS @4ohm per channel. Designed primarily for passive speakers FOH rated between 200W - 300W RMS @8ohm. To send the main mix signal to your main left and right speakers, simply connect the two speakon plug outputs on the mixer to the inputs of your speakers using 2-core speaker cable with the appropriate plugs. A rear fan is in place to keep the amp cool when in use.

7-Band Graphic Equalizer
A 7-band EQ enables the main output to be tweaked for particular rooms and venues. Graphic equalizers are the main backbone for good sound in a venue, providing a clear representation of the frequency spectrum. They allow the user to cut certain frequencies that are prone to feedback, and boost certain frequencies that may be lost due to the acoustics of the room.

19" Rack Mountable - Rack Rails Included
The M-series mixing desks are all 19" rack mountable, with the rack rails required included with every model. The rack rails simply attach to the side of the mixer with 3 screws already present on the mixer, then it is ready to be placed into any 19 inch rack case or frame.

AUX / FX Sends and Routing
Equipped with an auxiliary (AUX) send, that allows an additional "mix" of channels to be sent from the mixing console to foldback speakers or outboard effects. Ideal for creating foldback mixes for on stage performers. Each channel can be set to have the signal sent to the AUX send either PFL or AFL (Pre Fader Level, After Fader Level). The FX send channel can also be used as a 2nd AUX send.

The M Series mixers also includes a stereo sub group, allowing for an alternative output of selected channels via the Sub 1-2 Out XLR's. The sub-group can also be routed into the main mix, allowing for channels sent to the sub-group to be added to the mix via a single fader.

Monitor and Headphone Outputs
The monitor output enables the main mix to be sent to an alternative set of speakers, mixing desk, or recording interface. While the headphone output allows the user to solo channels by pressing the 'PFL' or 'AFL' buttons, and listen to the main mix without the confusion of room acoustics getting in the way.

Quality Mic Preamps
Critical to the performance of any decent audio mixer are the in-built microphone preamps. The M-series preamps offer undistorted, noise-free gain with plenty of headroom, usually reserved for more costly mixing consoles and outboard preamps units.

In-Built Delay Effect
Each channel has an FX control knob that will send the signal to the in-built 'delay' effect processor. There is a single 'reverb like' delay effect that is highly controllable via the FX, Del and Rep knobs. The FX knob controls the prominence of the delayed signal, while the delay time and fade out of the delay are controlled by the 'Del' and 'Rep' knobs respectively.

3 Band EQ Channel Strip
Each channel strip has a standard 3-band EQ with Bass, Mid and High controls. 15dB of level control each way gives the audio engineer plenty to work with.

Built in MP3 Player
The M series includes an on board USB/SD recorder so you can record directly from the mixer onto your USB device or SD card. 


  • 8 Mic Preamps
  • 2 Stereo Line inputs
  • 7-band Main Mix EQ
  • 1 AUX / Monitor send channel (2 if FX used as AUX)
  • On board Effects processor
  • On board USB/SD recorder
  • Headphone Output
  • Supplies 48V Phantom Power


Maximum Input Level:

Mic +24dBu
Line: +24dBu

Other Line: +20dBu

Maximum Output Level: Main XLR: +26dBu
TRS +20dBu
Meters: 3 Colour LED, quasi peak response
Sensitivity: 0VU=+4dBu
Master Meter: 12 Segment, -30dB to Clip
Channel Meter: Green LED, Signal Indication
Frequency Response +/-0.5dB, 20Hz - 30KHz
Mic CMRR at 1KHz: >75dB Typical
THD+n at +14dBu at 1KHz: Mic to mix out <0.01%
Crosstalk (@ 1KHz):

Fader Shutoff >85dB
Mute Shutoff >85dB
Inter-Channel >82dB

Noise, rms 20Hz to 20KHz:

Mic Input EIN -122dBu
Residual output noise <-90dB
Main mix fader unity <-82dBu
Aux mix noise <-82dBu

3-Band EQ

High: Shelving +/-15dB - 12KHz
Mid: Peaking +/-15dB - 2.5KHz
Low: Shelving +/-15dB - 80Hz

Mono Channel

XLR balanced, pin-2 hot, 2kOhm, -60 to +14dBu
TRS balanced, tip hot, 10kOhm, -40 to +14dBu
XLR Phantom +48V

Stereo Channel TRS unbalanced, tip hot, 10kOhm, -40 to +14dBu
2-track Return RCA unbalanced, 4kOhm, -2dBu
2-track Send RCA unbalanced, <75Ohm, -2dBu
L/R Output XLR balanced, pin-2 hot, <75Ohm, +4dBu
(+22dBu max)
Sub 1-2 Output XLR balanced, pin-2 hot, <75Ohm, +4dBu
(+22dBu max)
FX / Aux Output TRS unbalanced, tip hot, <75Ohm, -2dBu
(+18dBu max)
Power Amplifier 2x 300W RMS @8ohm, 2x 450W RMS @4ohm
Headphones TRS, tip L, ring R, 30-600 Ohm recommended
Headphones TRS, tip L, ring R, 30-600 Ohm recommended
Power Consumption: 40 Watts
Power Supply: 110-240VAC, 50/60Hz
Dimensions: 468mm(w)x322mm(d)x153mm(h)
View PDF brochure for RETURNED: SWAMP 10 Channel Powered Mixing Desk - 2x 300W - 8 Mic Preamps - Graphic EQ

Be The First To Review This Product!

Help other SWAMP Industries users shop smarter by writing reviews for products you have purchased.

Write a product review

Product Enquiry Form Complete this form to email us your enquiry.


MPN: M210-P

Label: REP-314-M210-P

Sign Up For Our Newsletter

Copyright © 2020 SWAMP Industries