TASCAM US-2X2 2-in 2-out Audio MIDI Interface for Mac, Windows, iOS iPad USB 2.0
2-In/2-Out USB Audio Interface
New to record on your home desktop computer or your iPad? The TASCAM US-2x2 is the perfect starting point to get the best stereo audio signals for your recordings. It features 2 high-quality Ultra-HDDA microphone preamp with combo XLR jacks (switchable to instrument level for guitar or bass), an all new USB driver to make for an easy installation (even on iPads, iPhones or other iOS devices), zero-latency direct monitoring, and both headphone and line output volume controls. MIDI in and out are also included. It comes bundled with Cubase LE for both Windows and Mac. With solid audio specs, iOS compatibility, and an easy-to-read angled design, the US-2x2 is the ultimate 2-channel interface for home, project, and mobile studios.
XLR and TRS Accept Balanced Mic and Line Level Signals
TASCAM's Ultra-HDDA mic preamps design is based on discrete components, just like classic professional gear. It also has NE5532 op-amps, famously used throughout classic recording consoles and signal processors due to their sweet, musical sound. The XLR connector supplies +48V phantom power for condenser microphones. The combo input jacks includes TRS inputs for balanced line-level signals from professional processors and synthesizers. Finally, the two inputs can be switched to high-impedance for direct recording of electric guitar and bass. (Only the XLR or 1/4" input can be used, not both at the same time).
Simple Operation, Excellent Features
Installation of the US-2x2 is simple and fast, whether using the built-in class-complient driver or the high-performance ASIO or Core Audio drivers. Built from the ground up for superior audio performance, the software and driver suite of the TASCAM US-2x2 will keep your sessions running fast and smooth. The US-2x2 records at up to 96kHz/24-bit resolution. Even if your target is CD or MP3, recording at higher resolutions gives you more to work with in the mix and can result in a smoother sound. The most efficient computers and DAW software can produce a slight delay before reaching the outputs, which can distract some vocalists and instrumentalists. A Direct Monitoring path is included to monitor the input signal before it is sent to the computer. This allows musicians to concentrate on their performance instead of adjusting for latency delay. Standard MIDI input and output connectors allow connection with the thousands of keyboards, drum machines, controllers, and other sources that employ MIDI connectors. The interfaces can also be used for synchronized operation of multitrack recorders and other external recording equipment. Use Apple's Camera Connection Kit to connect the US-2x2 to an iPad or other iOS device. To make sure that you are able to get up and recording as quickly as possible, the US-2x2 comes bundled with a copy of Steinberg's Cubase LE.
Features:
- Two Ultra-HDDA mic preamplifiers
- Two XLR/TRS (MIC/LINE) inputs with full +48V phantom power
- Two TRS analog balanced outputs
- 18mW/ch headphone output
- USB bus-powered for mobile recording
- Optional AC adaptor available for use with iOS devices - power adapter requirement 5V (positive center ) 700mA
- Up to 96kHz/24-bit recording
- Support for Windows and Mac OS X operating systems
- USB 2.0 computer connection
- Connect with iPads and other iOS devices
- +48V phantom power for all inputs
- Two switchable high-impedance inputs
- Microphone preamp gain range of 57 dB
- Direct monitoring function for zero-latency monitoring
- Tough all-metal casing for durability
- Angled design provides excellent usability on a desktop
- Balanced analog TRS output jacks suitable for connection to powered monitors
- Standard TRS headphones output jack
- Separate controls for line and headphones output volumes
- MIDI input and output
- Output sources can be selected in the setting panel
- Input sound monitoring can be set to stereo or mono
- Input muting function eliminates noise from unused inputs
- USB class compliant 2.0 support
- License card included for Steinberg Cubase LE
- Confirmed operation with major DAW software (SONAR, ProTools, Cubase, Live, Studio One, Garage Band）
Specifications:
| US-2x2 | ||
| Sampling frequency | 44.1k/48k/88.2k/96kHz | |
| Quantization bit rate | 16/24bit | |
| Analog audio inputs | ||
| MIC IN | IN 1-2 | |
| Connector | XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED | |
| Input impedance | 2.2k ohms | |
| Nominal input level | ||
| GAIN:MAX | -65dBu (0.0004Vrms) | |
| GAIN:MIN | -8dBu (0.3090Vrms) | |
| Maximum input level (GAIN:MIN ) |
+8dBu (1.9467Vrms) | |
| Gain | 57dB | |
| INST IN | IN 1-2 | |
| Connector | 6.3mm(1/4")TS-jack(T：HOT, S：GND), UNBALANCED (When set to "INST" at MIC/LINE.INST switch) |
|
| Input impedance | 1M ohms | |
| Nominal input level | ||
| GAIN:MAX | -63dBV(0.0007Vrms) | |
| GAIN:MIN | -6dBV(0.5015Vrms) | |
| Maximum input level (GAIN:MIN ) |
+10dBV(3.162Vrms) | |
| Gain | 57dB | |
| LINE IN | IN 1-2 | |
| Connector | 6.3mm(1/4")TRS-jack(T：HOT, R：COLD, S：GND), BALANCED (When set to "MIC/LINE" at MIC/LINE.INST switch) |
|
| Input impedance | 10k ohms | |
| Nominal input level | ||
| GAIN:MAX | -53dBu(0.0017Vrms) | |
| GAIN:MIN | +4dBu(1.228Vrms) | |
| Maximum input level (GAIN:MIN ) |
+20dBu(7.75Vrms) | |
| Gain | 57dB | |
| Analog audio outputs | ||
| LINE OUT | ||
| Connector | 6.3mm(1/4")TRS-jack(T：HOT, R：COLD, S：GND), BALANCED | |
| Output impedance | 110ohms | |
| Nominal output level | +4dBu (1.273Vrms) | |
| Maximum output level | +20dBu (7.75Vrms) | |
| PHONES | ||
| Connector | 6.3mm(1/4") stereo phone jack | |
| Maximum output level | 18mW+18mW or more (THD+N 0.1% or less, 32ohms loaded) |
|
| MIDI IN / OUT | ||
| Connector | Din 5-pin | |
| Format | Standard MIDI format | |
| USB | ||
| Connector | USB B type 4-pin | |
| Format | USB2.0 HIGH SPEED | |
| Power | ||
| When connected PC | USB bus powered | |
| When connected iOS | AC Adapter (TASCAM PS-P520, sold separately) |
|
| Power consumption | 2.5W | |
| Dimensions |
7.32" W ×2.56" H ×6.3" D |
|
| Weight | 2.43lb (1.1kg) | |
| Operating temperature | 5 to 35˚C | |
Bundled software |
Steinberg Cubase LE | |
| Accessories | USB cable, Steinberg LE license card, User's manual, warranty card | |
| Audio performance | |
| Frequency response | |
| LINE OUT(BALANCED) | |
| 44.1k/48k Hz | 20Hz to 20kHz, +0dB/-0.1dB |
| 88.2k/96k Hz | 20Hz to 40kHz, +0dB/-0.2dB |
| PHONES | |
| 44.1k/48k Hz | 20Hz to 20kHz, +0dB/-0.5dB |
| 88.2k/96k Hz | 20Hz to 40kHz, +0dB/-2dB |
| THD | 0.003% or less |
| S/N ratio | 101dB or more |
| Crosstalk | 95dB or more |
| EIN | -127dBu or less |
| Computer system requirements | |
| Windows | |
| OS | Windows 7(32-bit SP1, 64-bit SP1), Windows 8.0(32-bit, 64-bit), Windows 8.1(32-bit, 64-bit), Windows 10 (32-bit, 64-bit) * For further information of the latest OS version, please click here. |
| Compatible computers | Windows-compatible computer with a USB 2.0 port |
| CPU type/speed | Dual core/2 GHz or faster (x86) |
| Memory | 2GB or more |
| DRIVER | ASIO2.0 , WDM(MME) |
| Macintosh | |
| OS | OS X Mountain Lion(10.8), OS X Mavericks(10.9) * For further information of the latest OS version, please click here. |
| Compatible computers | Apple Macintosh computer with a USB 2.0 port |
| CPU type/speed | Dual core/2 GHz or faster |
| Memory | 2GB or more |
| DRIVER | Core Audio, Core MIDI |
| iOS | |
| OS | iOS 7 |
Be The First To Review This Product!
Help other SWAMP Industries users shop smarter by writing reviews for products you have purchased.
