The iSK BM-600 Condenser Microphone is a high output, low noise, large diaphragm professional condenser mic with 3 selectable pick up patterns including "omni-directional", "uni-directional" and "bi-directional".

Built with a sensitve and delicate capsule, the BM-600 captures an accurate and clean sound perfect for recording in a silent studio.

3 Selectable Pick Up Patterns
The selectable pick up patterns (uni, bi and omni) makes the BM-600 a very versatile studio microphone. Recording a single vocalist, or instrument is best on the uni-directional (cardioid) setting, where the mic's pick up range is 180 degrees in front of the mic. The bi and omni directional settings are ideal for recording dual singers (bi), choirs (omni) and for use as a "room" mic.

Large 34mm Diaphragm
The large 34mm diaphragm on the BM-600 is ideal for recording full range, dynamic sounds such as vocals and acoustic insturments. The pick up range on this mic is also very strong, suitable for recording conferences or round table discussions.

Low Shelf and -10dB pad
The mic incorporates a low-shelf filter to cut bass and attenuate high frequencies. There is also a switch for a 10dB pad, particularly useful when recording drums.

With a gold-plate diaphragm capsule, exacting FET, low self-noise, high output and authentic reproduction of sound, the BM-600 is built to professional standards and is perfect for many recording, broadcast and performance situations.

Item Includes:
- 1x microphone
- 1x shock mount
- 1x mic case
- 1x wind shield
- 1x carry case

Features

• 3 Selectable Pick Up Patterns
• Low-shelf switch
• 10dB pad
• Large pick up range

Specifications:

• Type: Large Diaphragm Condenser
• Element: φ34 Pressure Gradient Transducer
• Frequency Response: 20hz - 20khz
• Polar Pattern: uni/bi/omni-directional
• Sensitivity: -31dB/-34dB/-35dB +/-2dB (0dB=1V/Pa at 1khz)
• Output Impedance: 150Ω/200Ω/200Ω
• Load Impedance: ≥1000Ω
  
• Self Noise: 14dB/15dB/16dB A
• Max Input SPL: 130dB (at 1kHz≤1% T.H.D) 140(with-10dB)
• S/N Ratio: 80dB/79dB/78dB
• Electrical Current: 3mA
• Net Weight: 420g
• Body Dimension: 50x190mm
• Power Requirement: 48v DC Phantom power (through balanced XLR cable)