NUX B3 PLUS Wireless Snap-on Microphone System 2.4Ghz

NUX B3 PLUS Wireless Snap-on Microphone System 2.4Ghz
Here is your solution if you require a dynamic wireless microphone. The NUX B3 PLUS Wireless Snap-on Microphone System 2.4Ghz has a new wireless algorithm, and is easy to setup and use. Bundle includes the NDM-3 dynamic microphone, charging cables, mount, XLR to 3.5mm cable.

Great Bundle
The B3 PLUS Mic Bundle uses our newest 2.4GHz wireless algorithm with NUX NDM-3 dynamic microphone. Plug the Transmitter (TX) to your mic, Receiver (RX) to PA system, and you are good to go. The B-3 Plus auto pairs with 6 channels scanning and can avoid Wi-Fi interference making it simple to use! Plug it in, turn it on, B-3 PLUS MIC BUNDLE makes it easy to everyone to embrace great wireless microphone sound. Buskers, singers, or speakers who use microphones to communicate with audiences, wireless offers you the freedom of unrestricted movement. No wires at all and no costly batteries required as it is fully rechargeable. With the B-3 PLUS MIC BUNDLE, you won't go wrong for a revolution of the wireless experience. You'll never want to go back to the mic cable again.

Great Performance
The range limit of the B-3 Plus is 30m outdoor and the latency is less than 3.5ms. Hi-Resolution audio quality: 24-bit / 44.1 kHz. This range is perfect for just about any space or venue, you can walk 100 feet away from the receiver and the signal will flow with no latency or a break. The long lasting built-in battery simply can be charged with USB cable which is included the package.

Also For Videographers and Live Streamers
Connect the TX to microphone and connect the RX to a device you want to connect the microphone (amplifier, speaker, mixer, camera or mobile phone). If you are using B3 PLUS to connect to a camera or a mobile phone, please use the converter cables. Turn on the TX and the RX, the auto pairing with channel selection will detect the current Wi-Fi environment and choose the best channel to operate. Please make sure the connected device is ON, and check the signal before you increase the volume.

Note: Transmitter does not provide phantom power, so use with condenser microphones is not possible.

Features:

• 2.4 GHz Broadcast - interference free
• 24-bit / 44.1kHz audio signal quality
• Less than 3.5ms latency
• 6 channels - auto pairing with channel selection
• Long lasting battery - up to 7 hours
• Up to 30m distance at open air areas

Specifications:

• Transmitter & Receiver
  • Sound Quality: 24-bit / 44.1 kHz Hi-Resolution Sound Quality
  • Auto Pairing & Channel Selection: 6 Channel Groups with Auto Pairing & Channel Selection
  • Low Latency: Less than 3.5 ms
  • Range: Up to 30m line-of-sight
  • Dynamic Range: 110db
  • Operating Band: 2.4GHz ISM Worldwide
  • THD + Noise: < 0.02% (1KHz@-10dbFS)
  • Battery Life: Up to 7 hrs
• NDM-3 Dynamic Microphone
  • Type: Dynamic
  • Impedance: 600Ω ± 15% (at 1K Hz)
  • Sensitivity: -48.4 ± 3dB (0dB = 1v/pa)
  • Frequency Response: 50Hz ~ 15KHz
  • Direction: Uni-Directional (Cardioid) Polar Pattern
  • Operating Temperature: -30°C ~ 60°C
  • Construction: Sponge Ref-shake Type
  • Dimensions: 171mm x 54mm x 54mm (L x W x H)
  • Weight: 261g