• Rowin Nano Series LN332S - Mini Guitar Looper Pedal

      In Stock
    Found a better Price? Price match now
    or interest free for up to 6 months with
    SAVE 15%
    Sale Ends:

    The compact LN332S Looper pedal from Rowin will enhance any guitarist's performance with the capability to record, playback, overdub, store and upload pre-recorded tracks. Includes reverse and half-speed playback modes.

    Rowin LN332S Guitar Looper Pedal
    The compact Looper pedal from Rowin will enhance any guitarist's performance with the capability to record, playback, overdub as well as store and upload pre-recorded sounds and tracks from a Windows based PC. With a click of the footswitch, the player can seamlessly move between modes, and utilise up to the 10 minutes of recording loop time available. This pedal is fantastic value, with a price tag much lower than most of the other Loop pedals on the market.

    Record and Overdub Using the Footswitch
    The best feature of the Rowin Looper is the ease with which recording and overdubbing functions can be completed. By clicking the footswitch, the Looper becomes record enabled, as displayed by the red indicator light. Click again and the light turns green to indicate playback mode. Similar steps are repeated for overdubbing, whilst holding down the footswitch will enter into the delete mode for erasing unwanted content.

    Reverse and Half Speed Modes
    The new 332S feature 2 additional playback modes, Half Speed and Reverse. This means you can record loops and have the play back immediately warped with slowed down or backwards sounding effects.

    Upload from Windows With USB
    The Rowin looper is Windows 10 compatible, allowing the user to store pre-recorded material on the pedal. Using the USB cable provided, the Looper can be connected to the PC or Laptop and WAV files transferred across, thus providing the ability for more complex, layered and professionally produced loops to be created and used in performance. For best results, download the Rowin Looper software from the Rowin website.

    Compact / Miniature Case Size
    Advances in circuitry design have made is possible for guitar effect pedals to be built in compact enclosures that literally fit in the palm of the hand. The mini design allows more pedals to fit on a pedalboard and helps reduce the overall weight, making them an ideal solution for the traveling guitarist.

    True Bypass Circuitry
    The compact inner circuitry is designed with a 3PDT true bypass switch ensuring an unaltered tone when the pedal is not engaged. A true bypass switch has the ability perform a true bypass of the internal hardware circuit of the pedal, meaning the signal goes straight from the IN to the OUT.


    • Zinc Alloy Shell
    • Level Control
    • Maximum Record Time: 10 Minutes
    • Unlimited Overdubbing
    • WAV file upload
    • USB Compatible with Windows 7 - 10
    • Included USB A to Micro USB Cable
    • DSP: 32bit Floating point
    • True Bypass 3DPT Switch
    • Power Supply: 9V DC (Negative Centre) - (Not Included)
    • Current Draw: 96mA
    • Input Impedance: 470k Ohms
    • Output Impedance: 100k Ohms
    • Input and Output Connectors: 1/4" TS Jack
    • Dimensions: L75mm x W36mm x H43mm (incl. switch)
    • Weight: 133g
    View PDF brochure for Rowin Nano Series LN332S - Mini Guitar Looper Pedal

    Rowin Nano looper

    By: on 12 October 2021
    Fantastic little looper, unsofisticated and easy to use compared to jamman solo and has sd card compatibility too, a lot smaller pedal than I expected- it’s tiny!

    Write a product review

    Product Enquiry Form Complete this form to email us your enquiry.


    MPN: RW-LN332S

    ID: 146159