JOYO R-07 Aquarius Delay and Looper Guitar Pedal
R-07 Aquarius Delay and Looper Guitar Pedal
This new pedal from the Revolution series by JOYO provides 8 different types of delay, tap tempo, and a looper. Ridiculous value for a budget pedal, ruggedly built, which provides huge versatility and creative options. The looper and delay can be run simultaneously.
Versatile and Creative
There are 8 different delay modes: Digital, Analog, Tape Echo, Tube Echo, Reverse Echo, Low-bit, Galaxy and Mod.
Digital Delay - For crisp note delays, retaining the shape and tone
Analog Delay - For smooth rounded delays, gradually losing shape.
Tape Echo - Sounding like a tape echo, crisp modulating repeats.
Tube Echo - Sounding like a true tube and tape echo, gradually losing shape.
Reverse Echo - It makes everything backwards and shoegazy.
Low Bit - glitchy 8 bit, for some nice lo fi glitch repeats
Galaxy - far out spacey, a little bit of glitchy reverse, out of this world..
Mod - adds chorus modulation to the repeats.
These are tweaked using a set of simple Level, Tone and Feedback controls. JOYO have also added a 300-second looper – so you can play along with your own guitar lines, too. And yes, you can run both the looper and delay simultaneously! The Tap Tempo function enables you to adjust the delay’s speed inbetween the repeats. Hold down the footswitch for 2 seconds to activate the tap tempo mode the LED goes red. Then tap the switch for the start and tap again for the end. The time between is the delay time.
JOYO R-Series Pedals
The Revolution Series of guitar pedals are the 4th generation of guitar effects from JOYO, and have some very cool design features. Amongst them all is the ambient lighting on the bottom and the top of the pedal casing that is new to the pedal game, making it stand out in the dark. These pedals are built to take rugged situations.
The Revolution Series have an ambience LED light on the front and rear sides of the unit, which sounds useful for dark stages.
'Sync' to the footswitch - The LED ambient lighting on the front and rear of the pedal will shine bright when the footswitch is pressed, also illuminating the LED effect indicator on the top of the pedal.
'Always' - The lights are always on, but the pedal is only activated when you press the footswitch and the LED effect indicator comes on.
'Off' - The lights are off, the LED effect indicator comes on when you stomp on it and activate the pedal..
“Premium tone at an affordable price”
- 8 Different Delay Modes
- 300-second Looper
- Tap Tempo
- Controllers: Level, Time, Feedback, Delay Mode Selector, Looper ON/OFF, LED Toggle
- Rugged Aluminum alloy casing
- Uses 9V Centre Negative AC Adapter (not included)
- Dimensions: 109mm x 67mm x 48mm
- Weight: 248g
- Input Impedance:2.2M
- Output Impedance: 100
- Rated current: 100mA
Be The First To Review This Product!
Help other SWAMP Industries users shop smarter by writing reviews for products you have purchased.