• BM-800 Condenser Microphone Home Studio Kit

    Includes 48V Phantom Power Supply & TRRS Adapter

      In Stock
    or interest free for up to 6 months with

    SWAMP's BM-800 microphone home studio kit is easy to set up and includes everything needed for a pro quality recordings - including 48V phantom power supply, broadcast stand, wind shield, pop filter, shockmount, XLR cable, 3.5mm cable, TRRS adapter.

    SWAMP BM-800 Condenser Microphone Kit
    The BM-800 microphone home studio kit is easy to set up and includes everything needed for a pro quality recordings - broadcast stand, wind shield, pop filter, shockmount and a 48V phantom power supply is also included with this package to ensure you get the best possible quality from the BM-800 mic. This is an all-in-one package for plug and play home recording studio set up. Ideal for musicians, singers, podcasters and streamers alike. At SWAMP we have selected the BM-800 and the best accessories to offer an extremely affordable but great quality condenser microphone package that performs without the need for extra components and interfaces.

    Desktop Broadcast Stand
    The broadcast stand is easy to put together and allows for adjustments to position and you can rotate the microphone away from you if you aren’t using it. The shockmount hold the microphone tightly and helps keep a clean recording. The bottom of the clamp has padding to prevent damage. 

    48V Phantom Power Supply Pre-Amp
    Typically, large diaphragm condenser microphones are designed to run on 48V phantom power. However a 3.5mm mic input on a standard computer soundcard or smartphone, only outputs ~5V. If you plug the BM800 mic directly into a computer, it will often work. Though the sound quality is seriously compromised with a lack of recording volume clearly noticeable. Cheaper USB sound cards will also have similar problems, as again they often output only 5V. Note that small diaphragm condenser mics (clip on types) only require 5V phantom power, and are hence directly compatibly with 3.5mm inputs on smartphones and computers.
    The solution is to provide the full 48V of phantom power that the mic is designed to for, allowing the microphone capsule to operate at its full potential. Delivering you crisper, warmer and cleaner recordings. If you have purchased a BM800 from other sellers are are looking for a 48V phantom power supply we also sell them individually. Otherwise sit back and relax, the SWAMP BM-800 kit as everything you need to start recording or streaming like a pro.

    Package Includes:
    1x Black BM-800 Microphone
    1x 48V Phantom Power Supply (AU plug adapter)
    1x Shock Mount
    1x Wind Shield / Screen
    1x Microphone Pop Filter
    1x Desktop Broadcast Mic Stand
    1x Stand Base for desktop mounting
    1x Clip (alternative for other regular mics)
    1x SWAMP XLR Male to XLR Female Cable 2m
    1x XLR Female to 3.5mm TRS Cable 2m
    1x TRRS Adapter Cable


    • 48V phantom power supply included
    • Large diaphragm capsule for crisp, detailed recordings
    • All-In-One plug and play home studio recording pacakge
    • TRRS adapter to plug into smartphone or newer laptop 3.5mm jacks



    • Polar Pattern: Uni-directional
    • Frequency Response: 20Hz-20kHz
    • Sensitivity: 45dB±1dB
    • Output Impedance: 1500Ω±30%(at 1kHz)
    • Load Impedance: ≥1000 Ω
    • Equivalent Noise Level: 16dBA
    • Electrical Current: 3mA
    • Microphone Output Interface: 3.5mm (0.14 Inch)
    • Usage Voltage: 48V phantom power supply
    • Wire: 3.5 inserted audio interface, 3 meters long
    • Microphone Body Weight: 0.51lb
    • Size: Approx. 16 x 5 x 5cm (6.3 x 1.97 x 1.97inch)
    • Microphone Material: Steel net + Zinc alloy hand holding part

    Broadcast Stand

    • Material: Steel
    • Arm Stand Weight: 850g(1.87lb)
    • Each Arm: 36cm(14.1inch)
    • Arm Stand Support: Up to 2kg(4.41lb)
    • Double-braced Arms: Add strength
    • Features: Stable, tough
    • Steel Construction: 9x9mm(0.35x0.35inch) cross-section
    • Mount Base: Installed onto the desk up to 55mm(2.17inch) thickness
    • Mount on: announcers’ desk with the metal mounting base
    • XLR Male to Female Microphone Cable: Pre-installed hidden inside the boom arm tubing

    Pop Filter

    • External Diameter: 155mm(6.10inch)
    • Function: Reduce P-pops in recording
    • Double-layer Net Diameter: 130mm(5.12inch)
    • Tube Length: 375mm(14.76inch)
    • Tube Diameter: 8mm(0.31inch)
    • Mounting Clamp: Up to 35mm(1.38inch)(Clamp adjustable)
    • Flexible Holder: 360 degree swivel mount
    View PDF brochure for BM-800 Condenser Microphone Home Studio Kit

    Be The First To Review This Product!

    Help other SWAMP Industries users shop smarter by writing reviews for products you have purchased.

    Write a product review

    Product Enquiry Form Complete this form to email us your enquiry.


    MPN: MP-BM-800--48V

    ID: 297290