JY-MW-1
The JOYO MW-1 is designed for converting your wired microphone into a wireless solution. Use your favourite mic and make it wireless! 5.8Ghz frequency is stable and free from interference. 30m range, under 5ms latency and rechargeable. For dynamic mics.
Loading... | ||||||
JOYO MW-1 Wireless Snap-on XLR Microphone System 5.8Ghz
The JOYO MW-1 is designed for converting your wired microphone into a wireless solution. Use your favourite mic and make it wireless! 5.8Ghz frequency is stable and free from interference. 30m range, under 5ms latency and rechargeable. For dynamic mics.
Easy to Use
Just plug the JOYO MW-01 transmitter directly onto the end of your favourite dynamic or battery-powered condenser microphones. This can then send your signal straight to the receiver which can be plugged into the XLR input of your mixer, audio interface, or other device. The built-in rechargeable batteries make the wireless system eco-friendly and energy efficient. You’ll be provided with a generous 4+ hours of performance before needing to recharge with the supplied USB cable.
5.8Ghz Frequency
The wireless microphone system operates on a frequency of 5.8GHz and has 4 channels to select from. This also makes it great for home and stage use, with a range of up to 30m uninterrupted. Any noticeable latency will be a thing of the past, the JOYO MW-01 sends your signal in under 5ms which is faster than many other wireless units on the market. The high-resolution 24-bit / 48kbps transmission ensure that every detail is transmitted with precision, so you will be heard with clarity without losing the nuances and dynamics. The 20Hz to 20kHz audio frequency response, you can be sure that no elements of your sound are lost. With 4 channels to pair the transmitter and receiver to, you can also pair multiple receivers to one transmitter channel.
Package Includes:
1x Transmitter
1x Receiver
1x USB dual Charging Cable
1x Instructions.
Features:
- Low latency rechargeable wireless system for microphones
- Fast 5.8ghz transmission with high 48khz 24 bit sampling rate quality
- plug-and-play wireless system for transforming your wired mic into a wireless one
- 4 channels, supporting 1 transmitter to 1 receiver and 1 transmitter to many receiver pairing.
- 4-5 hours battery life
- A built-in rechargeable lithium battery
- plug-and-play wireless system for transforming your wired mic into a wireless one
- Transmission distance > 30 meters
- 5.8GHz ISM frequency band
- 4 switchable channels
- Latency time
- 24bit Audio Resolution with Sampling Frequency of 48K
Specifications:
MW-1 Receiver | |
Power supply mode |
built-in lithium battery
|
Cell capacity | 3.7V 400mAh |
Reception Sensitivity |
-85dBm
|
Received frequency | 5.8GHz frequency |
Anti-jamming method | Frequency hopping |
Gain | 0 dB |
SNR |
105dB
|
Frequency response | 20Hz- 2OKHz |
Sampling rate | 24-bit }48KHz |
Output lmpedance |
680Q
|
Connection type |
XLR male port
|
MW-1 Transmitter
|
|
Power supply mode | built-in lithium battery |
Cell capacity | 3.7V 400mAh |
Transmission power | 7dBm |
Working frequency | 5.8GHz frequency |
Anti-jamming method | Frequency hopping |
Frequency response |
20Hz- 20KHz
|
Sampling rate | 24-bit /48kHz |
lnput Impedance | 3.3K |
Connection type | XLR female port |
It works
By: Shaun on 1 March 2021So I purchased 2 of these to see if I could convert my dynamic mics into wireless mics or wireless in ears. Unfortunately I found there was a hiss, very annoying. This hiss isn't there when the mics are plugged directly in using an XLR. Mics used, an old dynamic AKG and a brand new dynamic Shure pga48. However this product seems to work perfectly (no hiss) when used to convert my Behringer P1 IEM's to wireless. Not sure if there is a fix for the mic hiss issue or if I'm just using the wrong mic.
3 (3)