Beamz Radical-II LED Multi Effect Light

Beamz Radical II LED Derby with Laser and Strobe
The Beamz Radical II packs three of the most popular party effects into one compact fixture: a 4 x 3W RGBW LED derby that throws sharp multicolour beams, red (150mW) and green (75mW) lasers, and 16 white SMD strobe LEDs framing the lens array. Run each effect on its own or all together in auto or sound-active mode, link several units master/slave, or program your own show over 4-channel DMX, with the included IR remote making it easy to switch modes on the fly. It's an all-in-one light show for mobile DJs, parties and small venues.

Three Effects in One Fixture
The derby section uses four 3W single-colour LEDs - red, green, blue and white - projected through a multi-lens array to create crisp moving beams that sweep the room in single colours, combinations or rainbow chases. The red 650nm and green 532nm lasers add fine beams and scattered dot patterns across walls, ceiling and dance floor, with their own motorised movement. On top of that, 16 white SMD LEDs deliver bright strobe flashes and chase effects to lift the energy at the drop. Because every effect can be controlled separately, you can run the derby and strobe on their own when lasers aren't wanted.

Easy Stand-Alone Operation
You don't need a lighting desk to get a great show. Choose from seven auto programs with adjustable speed, or seven sound-active programs that follow the music through the built-in microphone with adjustable sensitivity. Master/slave mode keeps several units in sync for a bigger rig. The included IR remote handles blackout, auto and sound modes, speed, sensitivity, strobe, colour selection and switching the lasers on or off from across the room, and the rear control panel with LED display covers DMX addressing and settings.

DMX Control for Custom Shows
For DJs and venues running a controller, the 4-channel DMX mode gives direct control of the laser movement, derby motor rotation, colour macros (single colours, combinations and rainbow effects with or without strobe) and auto/sound speed. DMX connects via 3-pin XLR in and out, and an IEC power output (max 600W) lets you link power on to further fixtures to keep cable runs tidy.

Laser Safety Built In
The lasers are Class 3B, so the Radical II includes a laser key switch, an interlock connector for an emergency stop and a safety ring for attaching a safety cable. Hang it using the supplied bracket and a suitable clamp, keep laser beams above head height (Beamz specifies at least 3m between the floor and the lowest beam) and never aim them at the audience. Check your local laser-use requirements before operating in a public venue.

Features:

• 3-in-1 effect: LED derby, red and green laser and white strobe
• 4 x 3W single-colour RGBW LEDs for sharp multicolour derby beams
• Red (150mW) and green (75mW) lasers with motorised movement
• 16 white SMD LEDs for strobe and chase effects
• Every effect separately controllable - run the lasers on or off
• 7 auto and 7 sound-active programs with adjustable speed and sensitivity
• Master/slave linking for multi-unit shows
• 4-channel DMX with 3-pin XLR in/out
• IR remote control included
• Rear control panel with LED display
• Laser key switch, interlock connector and safety ring
• IEC power output for linking further fixtures

Specifications:

• Effects: Derby, laser, strobe
• Derby LEDs: 4 x 3W single colour (red, green, blue, white)
• Strobe LEDs: 16 x 0.5W white SMD
• Red laser: 150mW @ 650nm
• Green laser: 75mW @ 532nm
• Laser class: 3B
• Modes: DMX, auto, sound-active, master/slave
• DMX channels: 4
• DMX connection: 3-pin XLR in/out
• Power supply: 100-240VAC 50/60Hz
• Power consumption: 20W
• Power output: IEC, max 600W
• Included accessories: IR remote, mounting bracket
• Dimensions (L x W x H): 205 x 200 x 150mm
• Weight: 2.2kg