NUX B-11 PRO Wireless System for Violin and Viola

NUX B-11 PRO Violin and Viola Wireless Microphone System
The NUX B-11 PRO is a professional 2.4GHz wireless system designed specifically for violin and viola. A specially tuned cardioid condenser microphone captures your instrument's natural tone, transmitted at 24-bit/48kHz with latency as low as 3.9ms and a range of up to 50 metres, while built-in EQ presets, reverb and rechargeable batteries with magnetic charging free you completely from the limitations of wired pickups.

Specially Tuned Condenser Microphone
The cardioid condenser instrument microphone is voiced for bowed strings, capturing a natural, full-bodied tone rich in detail. A newly designed shock-absorbing mount reduces vibration noise while keeping the microphone assembly small and light, and two included clips fit both violin and viola. The magnetic transmitter attaches to a mount fixed at the edge of the instrument body, so it clicks on for the performance and lifts straight off for charging.

Pro Series Anti-Interference Technology
NUX's Pro Series wireless combines intelligent frequency hopping across 79 channels of 1MHz narrowband transmission, Audio Zip/Unzip coding, six stability levels (3.9ms to 10.2ms) and a true-diversity dual-antenna design. The system automatically selects the cleanest channel, keeping the signal stable and clear even in environments crowded with wireless devices.

Built-in EQ and Reverb
Professional Room, Hall and Plate reverbs are activated with a single button press on the transmitter, with detailed parameters adjustable from the receiver's menu. Ten EQ presets and 2 customisable EQ slots cover Classical, Modern, Warm and Custom styles for violin and viola, switchable at the press of a button.

Battery Power and Magnetic Charging
Both transmitter and receiver run on high-capacity lithium batteries - up to 6.5 hours from the transmitter and up to 11 hours from the receiver. Between sets the transmitter simply docks on top of the receiver to recharge. The receiver also works as a stage hub: its footswitch triggers Boost, Mute, Tuner, S/R Bypass or Reverb via short or long press, a Send/Return loop connects your pedals or multi-effects, and a built-in DI feeds mixers and recording gear directly.

Features:

• Designed for violin and viola - connect to amplifiers or mixers for rehearsal, recording or live performance
• Cardioid condenser microphone, specially tuned for violin performance
• Two mounting clips included, for violin and viola
• Pro Series anti-interference: intelligent frequency hopping, 79 channels with 1MHz bandwidth
• Six stability levels with true-diversity dual antennas
• 10 professional EQ presets plus 2 customisable EQs
• Room, Hall and Plate reverb effects
• High-sensitivity tuner for quick, accurate tuning
• Footswitch control of Boost, Mute, Tuner, S/R Bypass or Reverb
• Send/Return loop for guitar pedals or multi-effects
• Built-in DI for direct connection to mixers and recording equipment
• Magnetic charging - the transmitter recharges on top of the receiver
• High-resolution colour screen with customisable startup UI
• Carry case included

Specifications:

• Wireless band: 2.4GHz
• Audio: 24-bit/48kHz
• Frequency response: 20Hz-20kHz
• Output dynamic range: 112dB
• Latency: 3.9ms to 10.2ms (six stability levels)
• Wireless range: up to 50m (165ft) line of sight
• Boost: 0 to +12dB
• Display: 2.4 inch colour screen
• Battery life: transmitter up to 6.5 hours, receiver up to 11 hours
• Transmitter: 44.6mm (L) x 55.5mm (W) x 18.1mm (H), approx 33g (without microphone)
• Receiver: 90.4mm (L) x 115.3mm (W) x 54.8mm (H), approx 468g