OneOdio Studio Max 2 Hybrid Wireless DJ and Studio Monitor Headphones

OneOdio Studio Max 2 Low-Latency Wireless DJ Headphones
The OneOdio Studio Max 2 is a wireless DJ headphone built around one number: 9ms. Its included M2 transmitter runs OneOdio's RapidWill+ 3.0 link over 2.4GHz at 9ms latency, low enough to cue, beatmatch and play an instrument without the lag of ordinary Bluetooth. Tuned by KSHMR, OneOdio's global sound partner, it pairs 45mm drivers with dual Hi-Res certification, Bluetooth 6.0 with Sony LDAC, 3.5mm and 6.35mm sockets for wired use, and up to 120 hours of Bluetooth playback.

9ms Wireless Monitoring with RapidWill+ 3.0
Standard Bluetooth delays the sound enough that a cue lands late in your ears, which is why DJs have stayed tethered to a cable. The Studio Max 2 avoids that by skipping your device's Bluetooth altogether: plug the M2 transmitter into your mixer or audio source and it sends audio to the headphones over a dedicated 2.4GHz link at 9ms. The link uses the efficient OPUS codec at up to 400kbps and reaches around 10m, so you can move around the booth, studio or rehearsal room and still hear every beat in real time.

Hi-Res Sound Tuned by KSHMR
The custom 45mm high-flux drivers span 20Hz to 40kHz with a balanced tuning that lets you pick out each layer of a mix, shaped with DJ and producer KSHMR. The Studio Max 2 holds both the Hi-Res Audio and Hi-Res Audio Wireless certifications, and over Bluetooth 6.0 it supports Sony LDAC at up to 990kbps alongside AAC and SBC, so high-resolution playback from a compatible phone keeps its detail when you are away from the decks.

Four Ways to Connect
Switch between 2.4GHz low-latency wireless, Bluetooth, 3.5mm wired and 6.35mm wired to suit the job. Both a 3.5mm and a 6.35mm socket are built into the earcups and a 3m coiled cable is included, so you can go straight into a guitar amp, audio interface or DJ mixer with no adapter, from a bedroom studio to a festival stage.

Battery for the Longest Sets
Expect up to 120 hours of playback over Bluetooth and around 50 hours on the low-latency 2.4GHz link. When you are short on time, a 5-minute charge gives about 9 hours of play, and a full charge over USB-C takes around 2.5 hours.

Built for the Booth and the Road
The earcups swivel 180 degrees for precise single-ear monitoring and fold away for transport, and the crush-resistant EVA hard case protects the headphones, transmitter and cables on the way to the gig. The OneOdio app adds tailored EQ settings and a 60ms gaming mode.

Features:

• 9ms ultra-low latency over 2.4GHz with the included M2 transmitter (RapidWill+ 3.0)
• Tuned by DJ and producer KSHMR
• Hi-Res Audio and Hi-Res Audio Wireless certified
• Bluetooth 6.0 with Sony LDAC at up to 990kbps
• 45mm high-flux drivers with a 20Hz-40kHz range for detailed mixing
• Four connection modes: 2.4GHz wireless, Bluetooth, 3.5mm and 6.35mm wired
• 3.5mm and 6.35mm sockets on the earcups - no adapter needed
• Up to 120 hours of Bluetooth playback, with 9 hours from a 5-minute charge
• 180-degree swivel earcups for single-ear monitoring
• OneOdio app support with custom EQ and a 60ms gaming mode
• Foldable design with crush-resistant EVA hard case
• Ideal for DJing, music production, instrument practice, streaming and content creation

Specifications:

• Model: Studio Max 2 (SX2)
• Type: Over-ear, closed-back
• Driver: 45mm
• Frequency Response: 20Hz-40kHz
• Impedance: 34 ohms
• Sensitivity: 98dB (±3dB)
• Wireless: 2.4GHz RapidWill+ 3.0 (via M2 transmitter) and Bluetooth 6.0
• Latency: 9ms (2.4GHz with M2 transmitter)
• Bluetooth Codecs: LDAC (up to 990kbps), AAC, SBC
• 2.4GHz Link: OPUS, up to 400kbps
• Wireless Range: Up to 10m
• Battery Life: Up to 120 hours (Bluetooth), around 50 hours (2.4GHz low-latency mode)
• Quick Charge: 5 minutes for about 9 hours of playback
• Charging: USB-C, around 2.5 hours for a full charge
• Wired Connections: 3.5mm and 6.35mm sockets on the earcups
• Included: M2 transmitter, 3m coiled 3.5mm to 6.35mm cable, straight 3.5mm cable, 6.35mm adapter, USB-C charging cable, EVA carry case, user manual