Audio Adapter - XLR female to 1/4" male Mono TS
SWAMP Audio Adapter XLR(f) to 1/4"(m)
This adapter is used to connect cables terminated with XLR male connectors to devices with 1/4" Jack inputs.
Mic to 1/4" Jack
This audio adapter can attach onto the end of a regular XLR microphone cable, to enable a direct connection to a device with a 1/4" input.
Looking to plug a microphone into a guitar amp?
Microphones and guitar inputs have very different impedances, for optimal signal quality an impedance transformer should be used. Learn more here.
- Connectors: 1/4"(m) or 6.35mm TS / XLR(f)
- Weight: 0.05 kg
High Quality, low priceBy: Griff on 30 August 2016Very high quality, and very reasonably priced.
By: Mr. Andrew Blunden on 15 November 2015These things are a must. Every band should have 4 or 5 of these for those situations where gender change is required. This stuff gets right around traditional marriage. You can have male male, male female, female female and all sorts of races i.e. XLR TS etc
One of units purchased suffered a faultBy: Phil Coster on 22 August 2014One of units purchased suffered a fault. The 1/4" phono end became loose the very first time they were used. It was to be expected for the price though. I've replaced these, and other poor quality adapters with hand made items using quality Neutrik components. SWAMP: Apologies for the issue and thanks for the feedback. It's not a common problem we have had reported for the adapter range and we will contact you directly about providing a replacement or refund. We will also investigate our current stock and follow up with the manufacturer to make improvements.
By: Phil Coster on 2 June 2013Poor quality rubbish. Both mine suffered the same fault. The 1/4" phono end became loose the very first time they were used. It was to be expected for the price though. I've replaced these, and other poor quality adapters with hand made items using quality Neutrik components.
By: Cameron GARNER on 29 March 2013Awesome cables!