ClickCease
Dual XLR to 3.5mm Headphone Splitter 30cm - Stereo Signal
Filter

Dual XLR(m) to 3.5mm(f) TRS - Stereo Signal Headphone Splitter - 30cm

$14.69
$20.99
  In Stock
SAVE 30%
Sale Ends:
-
+
Finance Available
PayPal Checkout
Afterpay

30cm Length - Splits a 1/8" TRS stereo (left, right) signal into two individual XLR(m) channels. Ideal for connecting a 3.5mm mini-jack headphone cable, into two channels on a mixing desk.

Dispatch

Stereo Signal Headphone Splitter - 3.5mm Stereo to Dual XLR(m)
Splits a 1/8" TRS stereo (left, right) signal into two individual XLR(m) channels. Ideal for splitting an existing 3.5mm mini-jack headphone cable, into two channels on a mixing desk. By panning each channel Left or Right on a mixer, you can replicate the "true stereo" sound from the headphone output.

Need Extra Length?
Extend with a TRS 3.5mm 1/8" AUX Cable to give the desired length.

Note. A headphone signal is a "loaded" signal, designed to push the tiny speaker cone inside headphones. If connecting into a low-Z XLR mic input with a preamp (i.e. not a line level input), note that the signal may be "hot" and little or no gain may be required, even using a pad may be necessary. Setting your smartphone or laptop volume below 85% is a good way to minimise any possible input overload and signal distortion.

Quality Cable and Connectors
Our slim 4.4mm diameter cable maintains thick 23AWG conductors and a tight spiral shield, but utilises a thinner outer PVC jacket allowing for a smaller overall diameter. Ideal for patching devices in tight spaces and to minimise cable clutter. Using professional quality connectors, OFC conductors and a tight and thorough spiral shield, this cable is designed to transfer your signal without interference while being flexible and able to withstand the rigours of constant use.

Specifications:

  • Cable Colour: Black
  • Cable Core: 0.12mm*20*2(Conductors) + 0.12mm*48(Spiral Wrapped Shield)
  • Conductor Gauge: 23 AWG / 0.23mm2
  • Outer Diameter: 4.4mm
  • Connectors: 1/8" TRS (female) to 2x XLR (male) - (SWAMP TP180, Yongsheng YS137N-B)

Wiring:

1/8” female (Stereo / TRS) XLR (red) XLR (black)
Tip Pin 2  
Ring   Pin 2
Pin 3 Pin 3 + Pin1 Pin 3 + Pin1
  • Length: 30cm
View PDF brochure for Dual XLR(m) to 3.5mm(f) TRS - Stereo Signal Headphone Splitter - 30cm

Be The First To Review This Product!

Help other SWAMP Industries users shop smarter by writing reviews for products you have purchased.

Write a product review


MPN: SC-MiniJack-STF 2xXLR-M 3

Label: SC-MiniJack-STF 2xXLR-M 30cm

SKU: SC-MiniJ-STF-2xXLR-M-30cm

ID: 153809