Focusrite Clarett 4Pre 18-in 8-out USB Audio Interface

$1,178.99
In Stock

For ultra-low noise 24-bit/192kHz A-D and D-A conversion, the Focusrite Clarett 4Pre USB audio interface is the choice of professionals throughout the world. Featuring 4 Clarett mic pres, ADAT I/O, and 2 monitor outs. Compatible with both PC and Mac.

Focusrite Clarett 4Pre 18-in 8-out USB Audio Interface
For ultra-low noise 24-bit/192kHz A-D and D-A conversion, the Focusrite Clarett 4Pre USB audio interface is the choice of professionals throughout the world. Featuring 4 Clarett mic pres, ADAT I/O, and 2 monitor outs. Compatible with both PC and Mac.

Clarett Series Preamps
Focusrite Clarett 4Pre USB is an audio interface that has been designed to deliver high performance microphone pre-amplification with transparent audio conversion, in a low-noise, low-distortion lightweight unit. The dynamic range of the Interfaces in this range is 119dB, and users have the choice of either USB bus power (3A @ 5V 15W USB Type-C ports) or the included 12V power supply. The Clarett 4Pre USB is equipped with four front panel mic/line inputs, two of which have high-headroom instrument inputs for recording hot signals without distortion. Each mic pre has a separate gain knob with a Gain Halo meter that makes it easy to set the correct input level. The interface also provides four line-level outputs, MIDI I/O, stereo S/PDIF I/O, and eight ADAT input channels to expand your setup. The front panel features two 1/4" headphone outputs with independent volume controls. A pair of +48V phantom power switches allow you to turn on phantom power for condenser microphones on channels 1 and 2, and/or 3 and 4 respectively.

Many Features
The Clarett 4Pre USB offers a comprehensive software package that includes the Focusrite Red Plug-In Suite with accurate models of the Red 2 equalizer and Red 3 compressor, the Brainworx bx_console Focusrite SC plug-in that emulates the sound of Focusrite ISA 110 Equalizer and ISA 130 Dynamics Modules, the Softube Time and Tone Bundle with reverb, delay, mastering, and distortion plug-ins, and more. Also provided is Focusrite Control software that enables you to configure your routing and monitor mixes from Mac and Windows computers or iPad, iPhone, and iPod touch devices.

Air Mode
Clarett series Interfaces record with super-low latency and each channel can enable “AIR” mode to replicate the analogue sound of Focusrite’s classic transformer-based ISA preamps.

Features:

  • Four Air-enabled mic preamps emulate the sound of the company's original ISA mic preamp
  • Low-noise (-128 dB EIN) mic preamps with low distortion and up to 118 dB dynamic range
  • Precision 24-bit / 192 kHz A/D and D/A conversion
  • Record with low latency through amp simulators and effects plug-ins
  • Four mic/line XLR-1/4" combo inputs on front-panel—two of them with high-headroom instrument inputs for recording hot pickups without distortion
  • Four additional line 1/4" jack inputs on rear panel
  • Switchable 48V phantom power
  • Stereo S/PDIF I/O
  • Eight channels of ADAT inputs to expand system
  • 5-pin MIDI I/O
  • Two monitor outputs with anti-thump technology
  • Two additional line outputs
  • Two headphone outputs with independent volume controls
  • Gain Halo illuminated rings around the gain controls light up green when there's signal present and turn red when the level is too high
  • Supports any Mac or Windows computer with USB 2.0 or later
View PDF brochure for Focusrite Clarett 4Pre 18-in 8-out USB Audio Interface

Be The First To Review This Product!

Help other SWAMP Industries users shop smarter by writing reviews for products you have purchased.

Write a product review

Product Enquiry Form Complete this form to email us your enquiry.

 

Sign Up For Our Newsletter

Copyright © 2021 SWAMP Industries