ClickCease

Radial Catapult Mini RX 4-Channel Cat 5 Analog Snake

Male XLR Version

$164.99
In Stock
RRP $209.00

The Catapult Mini series of products provide a passive solution to send four channels of analog audio over Cat5 or Cat6 ethernet cable. This mini RX version has 4x male XLR's. All Radial Catapult modules are compatible, combine with the TX4 or mini TX.

Radial Catapult Mini RX 4-Channel Cat 5 Analog Snake
The Catapult Mini series of products provide a passive solution to send four channels of analog audio over Cat5 or Cat6 ethernet cable. This mini RX version has 4x male XLR's. All Radial Catapult modules are compatible, combine with the TX4 or mini TX.

4-Channel Cat 5 Audio Snake
The Radial Catapult Mini System works like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Radial Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Straight-Wire Passive Operation
Radial Catapult modules require no power to operate, and since they keep the signal in the analog realm, no digital conversion is necessary. Straight-wire connection from the XLRs to the RJ45 connector on a Cat 5 cable ensures that your audio passes through without coloration or distortion.

Utilise Pre-existing Cable Installations
As many buildings are already pre-wired for Cat 5, you can take advantage of this to transmit audio between distant rooms without the need to install or supply new cabling. This eliminates the need for bulky and expensive multi-channel audio cable, and allows contractors to benefit from installed network cable and easily connect from one room to another.

Mix and Match
Three versions of the Radial Catapult Mini are available: The Mini TX features female XLR connectors, the Mini RX has male XLRs, and the Mini TRS is equipped with ¼” TRS jacks for balanced connection to any pro audio device. All of the Radial Catapult modules are compatible with each other, and each is sold individually, so you can select whichever combination best suits your needs. The Catapult Mini RX and TX can be used together as a pair, creating a compact 4-channel audio snake. However, if you prefer to have a stage box to plug microphones into, but want a compact breakout cable that fits in the case with the mixer, combine the Catapult TX4 with the Catapult Mini RX. A variety of modules allow you to customize your transmit and receive devices to suit any application.

Features:

  • Send four channels of analog audio over a Cat 5/6 cable
  • XLRM connectors for receiving signal
  • Works with a building’s existing cable infrastructure
  • Compact and lightweight, yet durable and rugged
  • Economical Cat 5/6 cable replaces bulky multichannel audio snakes
  • Also available with XLR-female or ¼” TRS connectors

Specifications:

Audio circuit type: Passive splitter
Frequency response: 7Hz ~ 20KHz
Dynamic range: 140dB
Total harmonic distortion: 0.0005% @ 1kHz
Common Mode Rejection Ratio: >103dB
Maximum Input: +35dBu
Features
Ground lift
Input Connectors: XLR, TRS, RJ45 (model dependant)
Output Connectors: XLR, TRS, RJ45 (model dependant)
General
Construction: 16-gauge steel chassis & outer shell
Size (L x W x D): 105 x 40 x 33mm
Weight: 0.4kg
Power: Passive, no power required
Conditions: For use in dry locations only between 5°C and 40°C
View PDF brochure for Radial Catapult Mini RX 4-Channel Cat 5 Analog Snake

Be The First To Review This Product!

Help other SWAMP Industries users shop smarter by writing reviews for products you have purchased.

Write a product review

Product Enquiry Form Complete this form to email us your enquiry.

 

Sign Up For Our Newsletter

Copyright © 2021 SWAMP Industries