PowerWorks ARTEMIS 12PD 450W Active PA Speaker


PowerWorks ARTEMIS 12PD 12" Bi-Amped Active PA Speaker 450W

Plywood Enclosure - 450W RMS / 900W MAX

  In Stock
or interest free for up to 6 months with

The ARTEMIS 12PD is designed as a high performance, light weight powered speaker. also can be used as a stage monitor. Featuring custom Class A/B and D amps, high powered 12" woofer and compression driver, back-lit DSP display, 450W RMS.


PowerWorks ARTEMIS 12PD 12" Bi-Amped Active PA Speaker
The ARTEMIS 12PD is designed as a high performance, light weight powered speaker. also can be used as a stage monitor. Featuring custom Class A/B and D amps, high powered 12" woofer and compression driver, back-lit DSP display, 450W RMS.

The ARTEMIS Series of active plywood enclosure speakers by PowerWorks have been designed as a high performance, light weight audio solution. The specially designed speaker box can also be used as a stage monitor, and can be flown or on speaker poles, or installed. These speakers deliver high definition audio with a wide frequency response. Compact and lightweight, these active loudspeakers provide a rich, extended low-end and natural high-frequency in a plywood enclosure that is easily transportable.

Two Integrated Amplifiers
Backed by 450W (RMS) of Class D/Class AB power and enhanced with easy-of-use DSP tuning functions, the ARTEMIS Series gives you all the power and DSP you need for both mobile and installed sound applications. Class D and Class A/B amplifiers are utilised to provide optimal response throughout the speaker's frequency range. A 400W (continuous), Class D amplifier powers the 12-inch low-frequency driver, providing efficient, clean power for low end when you need it. A 50W (continuous), Class A/B amplifier powers the 1.35-inch high-frequency driver, delivering a natural sounding high end. The combination can deliver up to 124dB SPL (max) of clear sound between 55Hz and 19kHz. Specially selected transducers and compression drivers with a powerful DSP, advanced housing material and anti-scratch black paint: all components combined to offer the best quality and value for the most demanding audio professionals.

Fast and Easy Customisation
The ARTEMIS Series loudspeakers are equipped with an easy-to-use DSP that makes it simple to customise your loudspeakers with the push of a button. Whilst also offering carefully programmed DSP presets, adjusting EQ, delay modes, limiter features and dynamics is easy to save and recall.

Flexible Inputs
You get two combo XLR mic/Jack line inputs, each with a microphone/line level preamplifier and independent gain control. A stereo 3,5mm Jack connection signal input for use with smartphones, tablets, and other consumer audio devices. These signals can be combined with the internal mixer, and a balanced XLR Mix output lets you send the signals to other ARTEMIS-series loudspeakers.

Versatile Mounting
The ARTEMIS Series of cabinets can be mounted in several ways, providing amazing versatility. The multi-angle enclosure for upright FOH (front-of-house) use and rubber feet on one side for on stage monitoring applications. Flying the speaker using M8 flying points or ground-stack it for portable applications. Mounting on a tripod with straight 0 or 7degree angles, or atop a ARTEMIS-series subwoofer using an optional sub pole (not included). The integrated DUO TILT pole mount lets you aim the speaker level 0° or at a 7° downward tilt. The speaker is easily transportable, thanks to its 2 side-mounted handles. Flying cabinets vertically or horizontally PowerWorks ARTEMIS full range cabinets can be mounted vertically or horizontally as above using the integrated flying M8 hardware points.


  • Bi-Amped Active Speaker
  • 450W RMS – 900W Peak Power
  • Amplifier Class-D (low-frequencies); Class-AB (high-frequencies)
  • Graphic back-lit DSP display
  • Plywood enclosure with black anti-scratch paint
  • Standard D35mm tripod / pole hole
  • 30° and 45° Stage Monitor Usable Angles


  • Frequency Response: 55Hz – 19kHz / -10dB
  • Max SPL: 124 dB
  • Low-freq. Transducer: 12″ Woofer 2.36″ Voice Coil
  • High-freq. Transducer: 1.35″ Compression Driver
  • Coverage: H90° x V60° 
  • Crossover Frequency: 2.8kHz
  • Low-Frequency Amplifier: Class-D 400W RMS – 800W Peak
  • High-Frequency Amplifier: Class-AB 50W RMS – 100W Peak
  • Power Consumption: 450W
  • Fuse: T3.15A-250V
  • AC Mains: 220/240V / 50/60Hz
  • Input Connections: 2 x COMBO (XLR + 1/4″ Jack, balanced) + 3.5mm Jack
  • Output Connections: 1 x XLR (Mix output, balanced)
  • Housing material: Plywood Cabinet
  • 1.2mm Steel Grille
  • Handles: 2 on sides
  • Tripod/Pole Hole: Duo-tilt 0° and 7°
  • Speaker Size (W x H x D): 450 x 687 x 465 mm
  • Speaker Weight: 22.4 kg
View PDF brochure for PowerWorks ARTEMIS 12PD 12" Bi-Amped Active PA Speaker 450W

Be The First To Review This Product!

Help other SWAMP Industries users shop smarter by writing reviews for products you have purchased.

Write a product review


ID: 271663